Tamiya Lunch Box

Purchased this as one of those essential classics, but then got carried away reading about all of the modifications in forums.  I ended up modifying the front suspension, adding the third shock at the back, replacing all four shocks, fitted alloy body pins and a cross-beam at the front of the chassis to prevent bending of the plastic chassis.  I test-drove it after completing it as a stock build to see how it was, pretty much just as described – bounced around all over the shop and made some rather alarming banging sounds from the suspension, that was just casual bashing around the driveway too.  After modifications to the suspension the difference was a marked improvement all-round.

The body was painted using Tamiya TS spray paints, first fine white surface primer which was sanded with very fine wet and dry, then several TS-16 yellow top coats that were sanded with wet and dry between coats to get a very smooth and glossy finish; it’s not car showroom perfect but still pretty good.

About Jonathan

I am the owner of this blog and domain. I usually don’t bite unless provoked.

This entry was posted in Big Boys Toys, Radio Controlled Vehicles. Bookmark the permalink.

2 Responses to Tamiya Lunch Box

  1. Anonymous says:

    Well done!

    I have been looking for a detailed pic of the fx suspension mod for a while. Thanks now I am confident in fitting the mod myself.

  2. Andy says:

    Thanks for posting the only decent photo of an FX10 mod on the net…
    Last thing I need to do to my Lunchie

Leave a Reply

Your email address will not be published.